Enviromental Impact
KlearKoat contains no chlorinated solvents or other ozone depleting solvents.



Applications
KlearKoat is available in various concentrations, and is applied by brush, roller or sprayer onto
cured dry concrete. Applied over concrete stains, KlearKoat seals, enhances the color, and locks
in the color to produce a permanent and beautiful stained floor. Once dry, a second coat may be
applied to enhance the floor.


Benefits

Clear and Colorless: KlearKoat goes on water white and never yellows.
Seals and Beautifies: KlearKoat penetrates into the pores of the concrete and seals out dirt and stains as it seals in beauty.
Dries to a smooth, tough, glossy finish: KlearKoat flows and levels to prevent brush strokes or roller marks, and dries smooth and glossy.
Available in various solids levels: KlearKoat can be applied at 15% to give deep penetration and sealing. This can be followed by a layer of 22% or 30% which will bond and unify with the sealer coat for a continuous protective coating of pure acrylic polymer. Successive coats always bond together.
Dries quickly: The active solvent system in KlearKoat evaporates quickly and completely leaving only the acrylic polymer. Once dry, all flammable solvents is gone and the area is safe and ready to use.
Accepts water based polish: For use indoors, the finished coating can be over coated with a water based


How To Use

1. KlearKoat may be applied by brush, roller, solvent resistant pump up sprayer, or lamb's wool applicator. Apply a thin uniform coat at the rate of one gallon to 400 ft. (40 m.)
2. Allow coating to dry for 4-6 hours and apply a second coating for maximum durability.
3. Equipment may be cleaned with Xylene or lacquer solvent


Properties
Type: Solvent based pure acrylic coating
Colors: Colorless and clear.
Odor: Solvent
Toxicity: Harmful if swallowed. avoid
breathing vapors
VOC’s: Depends on concentration
Flammability: Flammable
Composition: Pure high molecular weight
acrylic copolymer in an aromatic solvent base.