2012.05.22
Curb Color

$ 39.60
Shipping Costs Vary About Shipping...
Call us for Availability

LunaCrete® Curb Color is an exclusively formulated slurry coat mix designed for all types of Decorative Curbing.
Printable Version
Curb Color makes it easy to color your curbs whether you are stamping it or just coloring it, replacing the need for integral colors as well. Curb Color provides a hardened finished surface that is colorfast and will help protect the curb from damage.
Curb Color is your best choice for Decorative Curbing!

NOTE: Requires 3 Tint Packs Per Pail

Directions:
Step 1: Using a clean dry mixing wand thoroughly blend dry Curb Color and (3) tint packs. Step 2: In a clean 5 gal Pail Measure 1 ½ gal of water, ADD 1 ½ gal of Curb Coat MIX thoroughly with drill, ADD 3 gal of mason sand and MIX thoroughly. ADD additional water if needed to create the consistency of pancake batter.
Step 3: Pour over curb face using watering can, then trowel surface leaving a thickness of 1/8” to 1/4”
Step 4: Add texture by stamping with a texture mat or roller coated with release powder.
Step 5: Seal the surface using LunaCrete® Klear Koat. Apply 3 coats thinning the first coat about 25%.
Material Safety Data
for Curb Color
SUPPLIER IDENTIFICATION
LunaCrete®
1154 N. US Highway 1
Ormond Beach, FL 32174
386-252-4243

Emergency Phone Number:
1-800-424-9300

Curb Color may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

HMIS
Hazardous Materials Identification System
HEALTH
1
FIRE
0
REACTIVITY
0
PROTECTION
E
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
COMPONENTS
Silica Crystaline Quartz
CAS # 144808-60-7
PER CENT 10%-30%
OSHA PEL 8H TWA 0.1 mg (Quartz/m3) (Respirable dust)
ACGIH TLV TWA 0.1 mg/m3 (Respirable dust)

Portland Cement
CAS # 6599-15-1
PER CENT 70%-90%
OSHA PEL 8H TWA 10mg/m3
ACGIH TLV 50 MPPCF (Total Dust)
For industrial use only.

•Major = Over 25 % , Minor = Over 6. 25 % , Trace = Under 6 %, Residue = Unknown % residue possible

PHYSICAL/CHEMICAL CHARACTERISTICS

SPECIFIC GRAVITY (H2O = 1): 2.7
EVAPORATION RATE (Butyl Acetate = 1): None
MATERIAL V.O.C.: None
APPEARANCE & ODOR: Gray or Colored Finely Ground, Odorless
SOLUBILITY IN WATER: Soluble
% VOLATILE BY VOLUME: 0

FIRE & EXPLOSION HAZARD DATA

FLASH POINT:
N/A
FLAMMABLE LIMITS IN AIR BY VOLUME:
LOWER: N/A UPPER: N/A
EXTINGUISHING MEDIA:
Non combustible. Use extinguishing method suitable for surroundings
No Fire or Explosion Hazard
SPECIAL FIREFIGHTING PROCEDURES:
Wear self-contained breathing apparatus with full face-piece, operated in pressure demand or other positive pressure mode. Wear full body protective clothing.
UNUSUAL FIRE & EXPLOSION HAZARDS:
Non combustible

REACTIVITY DATA
STABILITY: STABLE
CONDITIONS TO AVOID:
Dusting conditions
INCOMPATIBILITY (CONDITIONS OR MATERIALS TO AVOID):
Avoid contact with strong alkalies or strong acids
HAZARDOUS DECOMPOSITON OR BYPRODUCTS:
None known
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR

HEALTH HAZARD DATA
A) HEALTH HAZARDS
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Inhalation may cause irritation of respiratory tract and could promote coughing, dizziness and headache.
EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Eye contact: Direct contact irritates slightly with redness and swelling.
SKIN ABSORPTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Prolonged exposure can dry and defat skin causing cracks, irritation and dermatitis
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Ingestion: Can cause gastrointestinal irritation.
CARCINOGENICITY:
NTP? NO IARC MONOGRAPHS? NO OSHA REGULATED ? NO
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Dermatitis, respiratory tract irritation.
B) EMERGENCY AND FIRST AID PROCEDURES
INGESTION:
No harmful affects expected. If appreciable quantities are swallowed, call poison control center or physician. Do not leave victim unattended.
INHALATION:
If respiratory irritation or distress occurs, remove victim to fresh air. Seek medical attention if respiratory irritation or distress continues.
SKIN ABSORPTION:
If contact to the skin, wash thoroughly with soap and water. Seek medical attention if irritation or distress continues.
EYE CONTACT:
If contact with eyes, hold eyes open and flush with a steady, gentle stream of water for at least 15 minutes. Seek medical attention if irritation or visual changes occur.

PRECAUTIONS FOR SAFE HANDLING & USE
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Sweep up material and remove to disposal container. Mop with mild detergents or cleaning solutions. Observe all relevant federal, state and local laws.
WASTE ISPOSAL METHOD
Normal waste disposal. Avoid slurry of material may plug drains. Obey relevant laws.
PRECAUTIONS TO BE TAKEN IN HANDLING & STORING
Handling: Use a dustless system for storage and clean up if possible (Vacuum – Floor cleaner).
Wear gloves, eye protection and wear approved respirator. Wash hands before eating , drinking, using tobacco, applying cosmetics or using toilet.
Storage: do not store, use and/or consume foods, beverages, tobacco products or cosmetics in areas where this material is stored
OTHER PRECAUTIONS Practice Good Housekeeping, any food, drink or chewing product should be protected from the dust. Protect skin from prolonged contact with wet cement. Precaution must be taken because cement burns occur with little warning – Little heat is sensed.
Before using any LunaCrete Systems products, read the label thoroughly.

CONTROL MEASURES
RESPIRATORY PROTECTION
Dust mask recommended- NIOSH or OSHA approved Standard #1910.134.
VENTILLATION
Use local exhaust ventilation to control emissions at its source, preventing dispersion of it in the general work area.
PROTECTIVE GLOVES
Gloves may be worn for protection if skin is sensitive. (latex, neoprene, nitrile rubber)
EYE PROTECTION
Use safety glasses, goggles or face-shields for eye protection.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
NONE
WORK/HYGIENE PRACTICES
Avoid breathing dust. Wash hands thoroughly after handling and keep containers closed.



For additional information contact:
LunaCrete®
LunaCrete, LLC
1154 N. US Highway 1
Ormond Beach, FL 32174
(866) 386-9122 - Toll Free
(386) 252-4243 - Office
(386) 506-8924 - Fax
www.LunaCrete.com


LunaCrete, LLC
Phone: 386-252-4243
1154 N. US Highway 1, Ormond Beach, FL 32174
Lunacrete on Google Maps
Lunacrete on Yahoo Maps
See our Reliability report from the Better Business Bureau.
See our Reliability report from the Better Business Bureau.
Verifie Paypal Member
Find out more.
Google Maps